 |
 |
 |
 |
B94 Green Stripper - 5 Gal. This stripper is environmentally friendly. Does not contain any Methylene Chloride, DMF, DBE, NMP or Methanol. Removes powder coating in approx. 15 min. when used correctly. Brush on or dip. Use in well ventilated area and abide by all safe handling, use, storage, and disposal regulations.
Available in 5gal, 30gal, 55gal. sizes.
NOTE:::: This item drop ships from a 3rd party vendor and incurs a fixed $35 FedEx shipping charge. NO HAZMAT FEE
CharacteristicsSpecific Gravity 1.03 (8.66 lbs./gal.) Percent Volatile >95% VOC Content 15 grams/liter (0.125 lbs./gal.) Vapor Pressure .1 mm Hg Boiling Point (Initial) 219 degrees F Freezing Point Less than 30 F Flash Point: >200 F Shelf Life: Minimum 1 year, unopened, stored at less than 75 F
|
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Features
- A non-flammable,
water rinsable stripper with an acidic pH capable of stripping all
paints and finishes, especially powder coating.
- works at room temperature and does not need
heating.
- will rapidly strip polyurethanes, epoxies, all polyester
powder coatings, and catalyzed and conversion finishes.
- Does not contain any Methylene Chloride, DMF, DBE, NMP or Methanol.
- is fast and extremely effective.
|
|
 |
 |
 |
 |

|