Company Name

This unit is Propane Driven and can be easily hook up at any place and any time for the most convenient way to cure your parts. Keep in mind because it is Propane Driven you will need a good ventilated area to run this Infrared Unit.

Contrary to most beliefs Powder can be cured with open flames. 95% of the industrial market uses Natural Gas or Propane to cure Powder Coated Parts. Powder cures by metal temperature only and not with just air temperature. That is the reason why parts have to be cured for 20-30 minutes in a conventional oven to allow for the heat to bring up the actual metal temperature for powder curing of 8-10 minutes at 375-400 degrees. We recommend curing parts with unit 3-10 inches away from part. Time will depend on metal thickness. We do express that a laser thermometer is the best way to judge the curing of the powder as it reads the exact metal temperature. With this unit you can virtually cure any size part from a bicycle frame to a car frame provided you can get to every angle for the heat to access. This unit by far exceeds our competitors products. This unit is made of more durable components and heavier steel. It is completely mobile to allow you to move all around your parts for a better and faster cure. Because of the Propane we can reach a much higher and faster temperature than the 110 electric can ever achieve because of the limitations only a 110 plug can achieve in wattage output.

• Become a Member
  
  
• Buy Any of Columbia Coatings Powder Coating
  Gun Systems (Excluding Chicago Electric Guns)
  
  
• Become a Distributor