|
|
Basic Powder Coating Instructions
Basic Powder Coating Instructions.
Also
check out our forums at www.ColumbiaCoatings.com
for tips and techniques from other powder coaters.
Pretreatment:
Sand Blast P |
Kool Koat 3.0 w/ Powder Keg Operation Tips
Here are the steps for proper operation of the Kool Koat 3.0. by "Doc" from CC forum 1) Turn ALL adjustments to their off position and then add powder to the hopper. Keep in mind that the powder will |
Poly Black Plastisol
1. Clean and degrees part and use Columbia Coatings Iron Phosphate.
2. Pre-heat part in oven at 375-385 degrees for 10-15 minutes on small thin parts and 20-25 for thick parts.
3. Remove part |
|
|
