Shop Cleaning / Prepping

Lab Solvent Thinner for Lab-metal and Hi-Temp Lab-metal, and metal cleaner. Lab-solvent cuts grease, oil and dirt, and is recommended as a metal cleaner and degreaser to prepare surfaces for Lab-metal and Hi-Temp Lab-metal applications.

Out-Gass Builder  Primer This primer addresses out-gassing issues common with aluminum and cast metals. Its high-build characteristics enable it to be used as a building/filling material as well, like a Bondo for Powder Coating.  This is an ideal universal primer. It shoots and coats like other powders. Adding a priming step to your process can help defeat problems with adhesion, poor surface quality, uneven surfaces, and orange peel.  Application...

Red PrimerThis is a good primer for epoxies, as well as other powders. Great for chemical resistance and high impact durability. It's shoots and coats like other powders. Adding a priming step to your process can help defeat problems with adhesion, poor surface quality, uneven surfaces, and orange peel.Features High Impact and Chemical Resistant Oil & Fuel Resistant Do not Recommend Putting in direct UV Sunlight Favorite for Industrial Applications ...

Rust Remover Columbia Coatings Rust Remover converts rusted metal into a dark, rust-retarding, paintable surface. Spray on and leave for of long term rust prevention if not coating immediately. Parts should be cleaned before coating. Approximate coverage: 150ft²/QuartApply with any liquid spray bottle or large sprayerSpray on, let dry for rust conversionCovers surface contaminates and rustConverts to paintable surface ...

Super Degreaser Safely use on iron, steel, aluminum, and other metals.  Economically and safely replaces inflammable solvents Non-corrosive. May be diluted with up to 15 parts water, depending on usage.For removing grease and heavy deposits, dilute 1 part Super Degreaser with 3 parts water.

WHITE EPOXY PRIMERThis is a good primer for all powders. Great for chemical resistance and high impact durability. It's shoots and coats like other powders. Adding a priming step to your process can help defeat problems with adhesion, poor surface quality, uneven surfaces, and orange peel. This is a great option if you need an epoxy primer, and you also need a light colored base coat.APPLICATION NOTE: Be sure that you only do a PARTIAL CURE on this primer before applying your top coat of...

This is a good primer for epoxies, as well as other powders. Great for chemical resistance and high impact durability. It's shoots and coats like other powders. Adding a priming step to your process can help defeat problems with adhesion, poor surface quality, uneven surfaces, and orange peel. Not for use on aluminum. APPLICATION NOTE: Be sure that you only do a PARTIAL CURE on this primer before applying your top coat of powder. If you cure this epoxy based Zinc Primer all of the way, your...