Carrera Satin Black (Quart) - Columbia Coatings - Powder Coating Equipment & Supplies
Built-to-Order
In Stock
Extended
Lead Time
Out Of
Stock
Back Ordered
Drop Shipped

Technical Details

Carrera Satin Black (Quart)

32355
0 customer reviews
SKU: CPA-CARSB-32Categories: Ceramic Coatings, Coating Supplies, Exhaust - Engine - BrakeManufacturer: Columbia Coatings

CARRERA SERIES SATIN BLACK:

Designed as an air curing coating with variations that handle multiple applications, including thermal barriers, thermal dispersants, and. Carrera coatings will cure over a period of 24 hours and will continue to harden over seven days. Please see data sheets for more information. These coatings are only available to businesses at this time.

Primarily designed as an exhaust coating. It has a good adhesion to virtually all metals and some plastics. It can be used on any part in the exhaust system. Designed for single coat coverage.

  • Appearance: Black. Other colors including red, blue, silver, and orange available upon request.
  • Thermal Barrier that can withstand over 1800F substrate temperature and up to 2000F environmental temperature.
  • Corrosion and chemical resistant
  • Very low V.O.C.

    APPLICATION:
    Clean metal using standard cleaning methods with Columbia Coatings Super Degreaser (sd-mto25) and can even use a pressure washer with injector for the cleaner. Make sure the parts are rinsed well from chemical then blow the part of after washing. Let parts dry and then repeat process with a Non-Petroleum Solvent Based cleaner such as Acetone, MEK or Toluene if see additional cleaning is needed. Sandblast parts (ONLY WHEN DRY) with 10X EpiX Blasting Media MP 70/100 Grit (EPIX), or 120 grit aluminum oxide. Do not use glass bead!

    • When done blasting blow excess dust from parts and handle with protective gloves to not transfer oil from hands to parts.
    • Put parts in oven at 400 degrees and bake for 30 minutes to kill any contaminates that may be missed from blasting.
    • Let parts cool to room temperature and use an air brush or touch up spray gun such as Columbia Coatings Ceramic Application Gun (CCAG2) or equivalent to a system that allows for application of a thin film build of approximately .001� to .0015.
    • Avoid excessive buildup of material as this can lead to loss of adhesion. DO NOT APPLY SECOND COAT AFTER THE COATING DRIES.
    • Curing: 24 hours with maximum hardness achieved after seven days.

$179.32
You save

You must be logged in to see applicable discounts.

Dropshipped
This item is dropshipped directly from the manufacturer or vendor.
Lead Time: Call For Shipping Times.

Dropshipped
This item is dropshipped directly from the manufacturer or vendor.
Lead Time: Call For Shipping Times.