Shop Internal Engine Coatings

POWERKOTE� CBC-1 CERAMIC THERMAL BARRIER COATING Combustion chamber coating for all metals. Excellent for piston tops. Thermal barrier/heat management Reduces part temperature. Protective to above 2000�F.Keeps heat in the combustion chamber longer through the power stroke.Blurs hot spots. Reduces the potential for detonation.Highly resistant to thermal shock. Survives cyclic heating and cooling. Increase torque and Horsepower Increase combustion chamber efficiency.Reduce fuel consumption....

TLML DRY FILM LUBRICANT Extreme pressure bonded lubricant. Solvent based, can be sprayed in very thin films. Reduces friction, galling and scuffing. Increase part life. Requires no clearance changes to compensate for coating. Oil retaining. Aids in cooling parts. Requires baking. Cures at 300�F minimum. Must be oven baked. WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov ...

Internal Coating, PowerKote� For Use On: Pistons, Combustion Chambers and Valve PortsThe PowerKote� line was developed to provide high pressure and high temperature lubrication. PowerKote� is available in a standard formulation, DFL-1, that will fit most needs. Versions are available that met FDA guidelines as well as versions where lubrication at temperatures over 1500f are needed. Most lubricants begin to fail at @ 700F; PowerKote� will lubricate from sub zero temperatures to well over...

POWERKOTE� CBC-2 CERAMIC THERMAL BARRIER COATING Combustion chamber coating for all metals. Excellent for piston tops. Thermal barrier/heat management Reduces part temperature. Protective to above 2000�F.Keeps heat in the combustion chamber longer through the power stroke.Blurs hot spots. Reduces the potential for detonation.Highly resistant to thermal shock. Survives cyclic heating and cooling. Increase torque and Horsepower Increase combustion chamber efficiency.Reduce fuel consumption....

Cermalube� Ceramic Lubricant CermaLube is a ceramic coating, designed to be used, on any rigid or semi rigid surface experiencing sliding, rotating or oscillating friction. CermaLube is designed to carry loads in excess of 350,00 PSI as well as lubricate at temperatures in excess of 1600�F. CermaLube is a combination of a unique water based ceramic resin and lubricating solids including, a ceramic lubricating frit. CermaLube combines the durability of a ceramic resin with the lubricity of the...

POWERKOTE� PKSX POWDERED LUBRICANT Designed to treat surfaces that either cannot be coated with a liquid lubricant or for parts that cannot be oven-cured.Load-carrying capabilities in excess of 350,000 p.s.i.Bonds at 20-millionths-of-an-inch thick. Requires no clearance changes.Functional lubrication up to 1500�F.Can be applied over dry film lubricants.Fluid retaining, compatible with petroleum-based and synthetic oils.Designed for cylinder walls, lifter bores, and valve guides.Extreme...

TLTD BLACK POLYPHEN� THERMAL DISPERSANT � More evenly distributes heat over a coated surface. � Aids in cooling heat-sensitive parts. � Oil shedding material � Enhances cooling through improved heat transfer to oil and other coolants. � Highly resistant to thermal shock. � Flexible � Survives bending and flexing. � Excellent for intake manifolds, brake components, oil pans, carburetors, radiators, etc. � Excellent chemical and corrosion resistance. � Resistant to most chemicals, including...

POLYPHEN� PISTON TOP GOLD THERMAL BARRIER Originally developed for top fuel drag racing engines. May be used on any combustion chamber surface in any type of engine. � Reduces heat penetration on coated parts. � Evenly distributes heat, reduces hot spots, aids in flame travel and combustion. � Reduces the amount of heat the incoming air/fuel mix absorbs, thereby reducing the potential for detonation. � Sheds carbon, reduces carbon buildup. � Solvent-based, cleanup with Acetone or similar....