Techline Coatings - Drop Ship

TLTD BLACK POLYPHEN� THERMAL DISPERSANT � More evenly distributes heat over a coated surface. � Aids in cooling heat-sensitive parts. � Oil shedding material � Enhances cooling through improved heat transfer to oil and other coolants. � Highly resistant to thermal shock. � Flexible � Survives bending and flexing. � Excellent for intake manifolds, brake components, oil pans, carburetors, radiators, etc. � Excellent chemical and corrosion resistance. � Resistant to most chemicals, including...

POLYPHEN� PISTON TOP GOLD THERMAL BARRIER Originally developed for top fuel drag racing engines. May be used on any combustion chamber surface in any type of engine. � Reduces heat penetration on coated parts. � Evenly distributes heat, reduces hot spots, aids in flame travel and combustion. � Reduces the amount of heat the incoming air/fuel mix absorbs, thereby reducing the potential for detonation. � Sheds carbon, reduces carbon buildup. � Solvent-based, cleanup with Acetone or similar....

Internal Coating, PowerKote� For Use On: Pistons, Combustion Chambers and Valve PortsThe PowerKote� line was developed to provide high pressure and high temperature lubrication. PowerKote� is available in a standard formulation, DFL-1, that will fit most needs. Versions are available that met FDA guidelines as well as versions where lubrication at temperatures over 1500f are needed. Most lubricants begin to fail at @ 700F; PowerKote� will lubricate from sub zero temperatures to well over...

IC-1 Floor Board and Firewall Coating IC-1 is designed to reduce thermal transfer and is excellent for firewalls, floorpans/footwells and heat shields to reduce heat transfer. It is reflective to heat and provides an excellent thermal barrier.Ready to spray - no thinning needed Do not thin - Stir and shake well before us.1. All parts must be clean and free of oil, grease, moisture, dust, scale or corrosion.2. Clean all parts using acetone, M.E.K., or similar material. Do...

POWERKOTE� PKSX POWDERED LUBRICANT Designed to treat surfaces that either cannot be coated with a liquid lubricant or for parts that cannot be oven-cured.Load-carrying capabilities in excess of 350,000 p.s.i.Bonds at 20-millionths-of-an-inch thick. Requires no clearance changes.Functional lubrication up to 1500�F.Can be applied over dry film lubricants.Fluid retaining, compatible with petroleum-based and synthetic oils.Designed for cylinder walls, lifter bores, and valve guides.Extreme...

COLORGARD SERIES HIGH HEAT CLEAR: ColorGard is a ceramic reinforced coating designed to be applied to automotive exhaust such as Cars, Trucks, Off Road Vehicles, Agricultural, Motor Cycles and much much more. Due to unique ceramic nature, the coating also functions as a very effective thermal barrier while reducing thermal radiation. Keeps your components surrounding coated parts cooler. The coating cures at a very hard super durable surface with excellent adhesion. Most ColorGard...

METALLIC CERAMIC PASTE (1 LB.) Thickening MCX with MCP CermaKrome (MCX) and Metalic Ceramic Paste (MCP) are compatible materials and they can be used to thin or thicken each other. These products are both water based and Distilled water can be used to thin them even more. Changing the level of water and aluminum in the coating will change how it dries and the resulting finish, you can use these two products to adjust for environmental changes that are beyond the control of most shops....